Thank you for
Making your hobby an Air Hobby!!!
Operating software: Every operating program in the unit is controlled with mutual links and communications to prevent every possible error. Maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error, ect are a built-in safety features.
High-power and high-performance circuit, 280W: BC8HP employs a high powered circuit that has maximum output power of 280Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 8 series of Lithium batteries with maximum current of 12A. Furthermore, the cooling system is so efficient that can hold power without any trouble of overheating the circuit or the operating program.
Individual voltage balancer for Lithium batteries built in: The BC8HP has an individual cell voltage balancer built in. So it does not need an external balancer when charging Lithium batteries (LiIo/LiPo/LiFe) for cell balancing.
LiPo, LiFe, LiLo: The BC6HP can accept three types of Lithium batteries - LiIo, LiPo and LiFe (A123). They have different characteristics by their chemistry.
Lithium battery 'Fast' and 'Storage' mode: Fast' charge reduces the charging time of Lithium batteries and 'Storage mode controls the final voltage of the battery for long time storage.
Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit: The charging capacity is calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Processing time limit: You can also restrain the maximum processing time to prevent from any possible over charge.
Input power monitor: To protect the car battery using as input power from being damaged, its voltage always being monitored. If it drops below the lower limit the process will be ended automatically.
Robust outer aluminum case: High-quality aluminum case is durable and very efficient to cool out the internal heat
Balance individual cells on discharge: The BC6HP also can monitor and balance individual cells on Lithium batteries during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with an error message.
Data Stored/Load: Up to 10 data memories. Each memory can be recalled at any time you need without reprogramming.
Input Power Requirements: When the charger runs on its maximum power, the input power should be enough to run the charger safely and effectively. If the input voltage is lower than 11.0V, the charger may be shut down or limited by its circuit power. To utilize the charger’s maximum power, the input power source should have good power above 15V and 35A. If the input voltage is lower than 12V, the charger’s charging power can be limited by 200W.