Voltage Regulators

Why would you need an Voltage regulator/BEC

• If you are running a gas plane and would like to use one of your li-poly batteries to power your servos. The regulator would connect between the battery and your receiver and can run up to 8 standard servos.
• You are running an electric plane and your ESC does not have a BEC built in, or it is too small. In this case you can wire the regulator in to the receiver to provide adequate power to your micro servos.
• You want MORE POWER or SPEED from your servos. Most ESC provide 4.8~5.0V to the receiver for the servos. If you plug in the regulator, your servos can run at 6.0V which produces more torque and faster response!

ArmSafe Arming Kit with 10AWG wire$15.49 Quantity:	ArmSafe Arming Kit with 12AWG wire$13.99 Quantity:	ArmSafe Arming Kit with 14AWG wire$13.99 Quantity:
ArmSafe Arming Plug$7.00 Quantity:	Fail Safe Switch for 5A and 8A Voltage Regulators, UBEC$5.25 Quantity:	VR-3 Voltage Regulator$22.00 Quantity:
VR-5L Voltage Regulator$23.00 Quantity:	VR-8L Dualsky 8A Linear Voltage Regulator/ UBEC with Flag Switch$27.00 Quantity: